PC680 Hold Down - HD680

Aluminum hold down box for the PC680 and the FAA approved small aircraft battery.  Can be used with or without automotive terminals.

Also available with a textured matte black finish

• Lightweight aluminum weighs less than 1 pound
• Can be mounted flat or upright
• Great for buggys, cars, and small aircraft
• Brushed finish suitable for painting

Measurements:
9.5" x 6.25" x 3.1"
Bottom lip measuring 1.75" secures bottom of battery.

Three mounting holes on each side.

PC545 Hold Down - HD545

Same style aluminum hold down box for the PC545. Can be used with optional SAE battery terminals.

Available only in the brushed aluminum finish.

Measurements:
9.25" x 4 7/8" x 3 3/8"
Bottom lip measuring 1.75" secures the battery from the under side.

Two mounting holes on each side.

Click any image for a larger view

Aluminum hold down box for the PC925 series - HD925SM 

• Lightweight aluminum
• Can be mounted flat or upright
• Great for buggys, cars, and small aircraft
• Brushed finish suitable for painting

Can be used on all PC925 models:
PC925, PC925 T, PC925 MJT, PC925 MJ, PC925 L, PC925 LMJ

Measurements:
8 9/16" x 7 1/16"
Bottom lip measuring 3/8" secures underside of battery.

Two mounting holes on each side.

Copyright © 2008 by West Coast Batteries Inc. and Enersys, all rights reserved. Text, graphics, and HTML code are protected
by US and International Copyright Laws, and may not be copied, reprinted or otherwise distributed by any means without explicit permission.